E14:01110, Construction machinery warm air combustion flame failure

When our warm air heater appeared “01110” fault flash code, your first check is:First, the fuel, fuel inside whether there is water, wax, volatile net whether blocking the injection port, and whether the oil circuit is smooth is the focus. Don't use irregular oil, irregular oil will affect the normal combustion of the machine, and there is a possibility of blocking the oil pump, diesel heater can't light the fire, diesel heater flameout, diesel heater smoke, the temperature is not high enough and the oil circuit has a lot to do with the oil, it may be the oil, but also may be that your oil circuit bubbles, the oil circuit appears to have a zigzag.Second, check whether the oil pump is working, the oil pump da da da da, does not mean that the oil pump is good, even if the work of the oil injection, injection volume line, the oil tank and the oil pipe joints to take the oil leakage net connection is not a wax plug, resulting in a small amount of oil will cause combustion fire. Do not arbitrarily change the oil pump, the flow is small will cause combustion fire, the flow is large enough to cause smoke dripping oil phenomenon.Third, check the heater intake pipe whether there is a foreign body, such as sucked in a leaf, plastic film and other things, resulting in the air inlet blocked may also appear out of the fire situation, clean up.Fourth, there is our heater encountered diesel fuel quality problems when the smoke, smoke after the air intake and smoke sucked in, this time there will be a fire, this time the exhaust port to twist a direction, do not let the air intake to the exhaust sucked back.Translated with DeepL.com (free version)